6Bee 3D - Custom 3D Printing

09/29/2026

For anyone waiting on invoices, I will be sending them out tomorrow! My apologies for them taking longer than normal. I’m working as fast as I can and I appreciate your patience 🩵

09/09/2026

📣 6Bee 3D Invoice Update!

I’m working through invoices as quickly as I can! 💛

I’ll be honest, I definitely underestimated how many orders would come rolling in once we reopened😂 Between keeping up with my regular job, the farm, and getting back up and running, it’s taking me a little longer than usual to get everything processed.

The good news? I should have ALL invoices sent out by tomorrow!

So if you’ve placed an order, keep an eye on your email and be sure to check your spam/junk folder just in case. 📧

Thank you SO much for your patience and for keeping me busier than I apparently thought I’d be! 😂 We truly appreciate every single order and all of your support. 🐝💛

Send a message to learn more

09/01/2026

𝐖𝐄’𝐑𝐄 𝐁𝐀𝐂𝐊! 🐝💛

After taking August to catch up on some much-needed software upgrades, cleaning, maintenance, and general housekeeping, the printers are fired back up and 6Bee 3D is officially back in action TODAY!

A few housekeeping things before orders resume:

📦 𝐒𝐇𝐈𝐏𝐏𝐈𝐍𝐆 𝐔𝐏𝐃𝐀𝐓𝐄

USPS has increased what they charge us for shipping, so our shipping rates are now:

• Under 40 tags: $7 flat rate
• 41–80 tags: $14 flat rate
• 80+ tags: $21 flat rate

We’re trying to keep your cost per tag as low as possible, so by adjusting our shipping rates, we’re hoping to keep our tag prices the same.

⭐ 𝐍𝐄𝐖 𝐅𝐋𝐀𝐓 𝐓𝐀𝐆𝐒 ⭐

Our new flat tags are officially available to order on the Jotform!

For the entire month of September, repeat customers can get them for just $6 per tag.

That’s $2 OFF per tag, and this is a ONE-TIME DEAL. They will never be this cheap again!

🇺🇸 𝐋𝐀𝐁𝐎𝐑 𝐃𝐀𝐘 𝐖𝐄𝐄𝐊𝐄𝐍𝐃 𝐒𝐀𝐋𝐄 🇺🇸

Friday, September 4 – Monday, September 7

Enjoy 𝟏𝟓% 𝐎𝐅𝐅 𝐒𝐓𝐎𝐑𝐄𝐖𝐈𝐃𝐄!

No minimums. Just 15% off everything for Labor Day weekend.

ᴘʟᴇᴀꜱᴇ ɴᴏᴛᴇ: ᴛʜᴇ $2 ʀᴇᴘᴇᴀᴛ-ᴄᴜꜱᴛᴏᴍᴇʀ ᴘʀɪᴄɪɴɢ ᴄᴀɴɴᴏᴛ ʙᴇ ᴄᴏᴍʙɪɴᴇᴅ ᴡɪᴛʜ ᴀɴʏ ᴏᴛʜᴇʀ ᴅɪꜱᴄᴏᴜɴᴛꜱ ᴏʀ ᴘʀᴏᴍᴏᴛɪᴏɴꜱ, ɪɴᴄʟᴜᴅɪɴɢ ᴏᴜʀ ʟᴀʙᴏʀ ᴅᴀʏ ꜱᴀʟᴇ.

We’re so excited to be back and ready to get those printers running! 🐝💛

08/30/2026

Hey Y’all, miss us?

After some much needed time off, we’re about ready to jump back into orders. If you’ve submitted orders this month, you’ll begin to see your invoices popping up in either messenger or your email.

We’re excited to announce we have a new style of tag dropping September 1st! We understand some herds just cannot have tags that dangle due to goats being, well, goats 🐐

These tags attach to your 1”-1.5” chains so that they lay flat and hopefully reduce possible chew-age (official term). More details on them to come, and the jotform will be updated shortly to include them! We can’t wait to see what you guys think of them.

For now, I (Emily) am enjoying my last few days off to work on the jotform and begin going through invoices, but I can’t wait to see you guys September 1st!!

07/19/2026

To continue providing the best products possible, 6Bee 3D will be taking the month of August off.

While our recent 10-day break allowed us to get caught up on orders, we realized our printers need some dedicated attention. During August, we'll be performing software upgrades, deep cleaning, replacing worn parts, routine maintenance, and tackling some much-needed shop organization.

Our goal is to be back up and running in September, and we'll keep everyone updated along the way if anything changes.

Thank you all for your continued support, patience, and for supporting our small business. We truly couldn't do this without you, and we look forward to creating more for you this fall! ❤️

Send a message to learn more

07/02/2026

📢 𝐑𝐞𝐦𝐢𝐧𝐝𝐞𝐫!📢

Starting today (July 1st), we're taking a short break from accepting new orders while we catch up on our current workload, reset, and spend some much-needed time with family over the holiday.

From July 1st through July 12th:
✨ We will not be processing any new orders.
✨ We will not be sending invoices for new orders.
✨ Messages may take a little longer than usual, but we'll respond as we're able.

We'll be back and ready to jump into new orders beginning 𝐌𝐨𝐧𝐝𝐚𝐲, 𝐉𝐮𝐥𝐲 𝟏𝟑𝐭𝐡.

Thank you all so much for your patience, understanding, and continued support of our little business. We truly appreciate each and every one of you, and we can't wait to get back to creating for you soon! ❤️

Send a message to learn more

06/26/2026

To better serve our customers and get caught up on our current workload, we will be taking a short break from July 1st through July 12th.

During this time, we will not be accepting new orders or sending invoices as we focus on:
✨ Catching up on existing orders
✨ Organizing and resetting after a very busy season
✨ Spending some much-needed time with family over the holiday

We will resume normal operations and begin sending invoices and accepting new orders again on July 13th.

We also wanted to give everyone a heads up that my brother and sister-in-law are expecting their first baby at the end of July! ❤️ Family is incredibly important to us, and depending on when baby decides to make their arrival, lead times throughout July-August may be a little longer than normal so we can spend time celebrating this special moment with them.

We truly appreciate everyone's patience, understanding, and support of our small family-run business. Thank you for allowing us the flexibility to balance work and family life. We look forward to creating more custom orders for you soon! ❤️

— Emily & 6Bee 3D Printing 🐝

06/24/2026

📢 Quick Announcement

We will be away attending a family event from Thursday through Sunday. During that time, replies to messages, comments, and emails may take a little longer than usual.

We will do our best to respond as we can, but please be patient with us while we spend some time with family. We will get back to everyone as soon as possible.

Thank you all for your understanding and continued support! ❤️

Send a message to learn more

05/23/2026

Hey everyone! We wanted to give a quick update regarding current order turnaround times at 6Bee 3D.

At the moment, we are running approximately 1–2 weeks behind our estimated lead time on some orders. We’ve had a few unexpected printer delays again that unfortunately put us a bit backed up. Please know we are working hard every day to get orders printed, packed, and shipped as quickly as possible without sacrificing quality.

We sincerely apologize for the delay and appreciate everyone’s patience and understanding. Anyone directly affected is being contacted individually, but if you have any questions or concerns about your order, please don’t hesitate to reach out to us. We’re always happy to help.

Thank you all so much for your support of our small business, it truly means a lot to us!!

Send a message to learn more

04/29/2026

Starting immediatley, any invoice that is not paid in full after 14 days of us sending it to you will be deleted and you will need to submit a new order form. We do our best to remind people that their invoice is due, and trust us- I understand life happens and sometimes things get forgotten. However, for exactly that reason we need to eliminate things from our day to day and so we can no longer send several reminders to pay your invoices.

We appreciate your understanding and can't wait to continue providing beautiful tags for your goats!

Send a message to learn more