Chase Alloys Ltd

Chase Alloys Ltd Specialist UK stockholders & suppliers of ferrous & non-ferrous metals and plastics since 1992.

As a privately owned company established in 1992, Chase Alloys Ltd is a stockholder of ferrous and non-ferrous metals. By offering a wide range of stainless steel and multi metal products to all aspects of British industry, Chase Alloys has become one of the finest stockists and suppliers in the Staffordshire and West Midlands areas. Our knowledge and experience gives us the ability to quote on no

n-standard and β€˜specials’ using our contacts both home and abroad to ensure that your requirements are fulfilled. We provide a whole range of machining services and advice designed to make the correct purchase of the material you require easier, which includes: Sawing, Shearing, Profiling, Special Fabrication, Drilling. We are pleased to announce that we have obtained our BS EN ISO 9001 2008 accreditation and have been approved by Bureau Veritas Certification as a certified stockist since 1996. At Chase Alloys Ltd, you will find knowledgeable professionals ready to handle your enquiries so call us today.

World Environment Day is a good time to talk about the environmental side of how we work. 🀝Managing environmental impact...
05/06/2026

World Environment Day is a good time to talk about the environmental side of how we work. 🀝

Managing environmental impact is an important part of how we operate day-to-day, and we continually work towards the targets set within our environmental policy and management systems.

That includes complying with relevant environmental legislation, reviewing working practices and investing in control measures that support responsible operations across the business.

You can take a look at our environmental policy on our website: https://bit.ly/3XV3CXY

Tough material? π™‰π™šπ™«π™šπ™§ an issue with the Everising E 530. πŸ˜…Our E-530 is working through a 3inch 316L round bar, and even ...
03/06/2026

Tough material? π™‰π™šπ™«π™šπ™§ an issue with the Everising E 530. πŸ˜…

Our E-530 is working through a 3inch 316L round bar, and even with a material like this it produces clean, controlled cuts that keep bar ends accurate and ready for the next stage of processing.

That consistency means the material arrives in a condition that's easier for our customers to work with, whether it's heading into CNC machining, fabrication or further processing, helping reduce variation, cut down extra prep work and keep production moving without unnecessary delays!

Material selection is becoming more application specific than ever!Choosing the wrong alloy does not just affect perform...
01/06/2026

Material selection is becoming more application specific than ever!

Choosing the wrong alloy does not just affect performance, it can also lead to unnecessary cost, delays and rework further down the line.

That's why working with a specialist supplier like Chase Alloys matters, not only for stock availability, but for understanding which material is actually right for the job.

If you'd like to discuss material selection or availability, get in touch with the team: https://bit.ly/43oZFyl

Another overnight run through the saws!These EN8 round bars have been processed on our Amada bar sawing machines and are...
29/05/2026

Another overnight run through the saws!

These EN8 round bars have been processed on our Amada bar sawing machines and are ready to be crated and shipped out first thing this morning.

With nine in-house saws running, this is how mornings often start here, with jobs turned around quickly, even outside normal hours when needed.

Another load processed and ready to go. πŸ‘Š

28/05/2026

Choosing materials for a job can seem straightforward, but there are a few common mistakes engineers still come across.

It' worth knowing what they are so you can avoid them later on. πŸ‘‡

Is imported material actually that cheap?On paper it can look like a saving at the start, but the extra costs often show...
26/05/2026

Is imported material actually that cheap?

On paper it can look like a saving at the start, but the extra costs often show up later once production is underway. Delays, inconsistent material quality, additional processing, and parts not performing as expected can all start adding time and cost back into the job.

Where material is sourced from matters more than people sometimes realise. As a UK-based metal stockholder, we help keep supply more predictable, reduce uncertainty around lead times and give manufacturers quicker access to the material they need when schedules are tight.

Material choice is important, but choosing the right supplier matters just as much. Keeping your supply chain closer to home can make a real difference once production gets underway.

πŸ“ž 01543 573 200
πŸ“© [email protected]

21/05/2026

Supply chains are being tested now more than ever, and it's starting to show who can and can't keep up!

When materials are late or unavailable, it doesn't just slow a job down, it puts pressure on deadlines and customer relationships. Being able to count on your supplier is what keeps work moving.

That's where π™¬π™š make a difference. 🀝

With over 500 tonnes of stock on hand, along with sawing, cutting and processing running around the clock, plus our own fleet that can provide next day delivery, we're set up to keep material moving when it's needed.

If your current setup is holiding you back, it might be time to look at another option.
πŸ“ž 01543 573200
πŸ“¨ [email protected]

20/05/2026

Good conductivity, easy to work with and built to last, copper is one of those materials that just gets the job done. πŸ‘

It's widely used across electrical, construction and general engineering applications, thanks to its strength, corrosion resistance and ability to handle demanding environments.

We stock π—–πŸ­πŸ¬πŸ­, π—–πŸ­πŸ¬πŸ―, π—–πŸ­πŸ¬πŸ² and π—–πŸ­πŸ¬πŸ΅ in a full range of forms, including profiles, round, hexagonal, square, flat, hollow bar and tube, as well as sheet and plate. Everything can be cut, processed and delivered on our own fleet, ready to use.

All that’s left to do is give us a call on 01543 573200 to order what you need.

Always great to hear customer feedback like this! πŸ™ŒWith over 500 tonnes of stock on hand and services covering 24 hour b...
18/05/2026

Always great to hear customer feedback like this! πŸ™Œ

With over 500 tonnes of stock on hand and services covering 24 hour bar sawing, cutting and processing, along with next day delivery, we're set up to handle π™¬π™π™–π™©π™šπ™«π™šπ™§ gets asked of us.

01543 573 200 | [email protected]

Keeping waste and environmental impact as low as possible is a key part of how we work, and Climate Change Day is a good...
15/05/2026

Keeping waste and environmental impact as low as possible is a key part of how we work, and Climate Change Day is a good reminder of why that matters. 🌍

We work in line with all relevant environmental legislation, supported by our environmental management system, which helps guide day-to-day decisions across the business.

In practice, that means cutting and processing metal to order so material is only used when needed, minimising unnecessary transport where possible, using more fuel-efficient vehicles and working with suppliers who take a similar approach.

We also keep our environmental policy under regular review to make sure we continue improving wherever we can.

Read more on our environmental management policy: https://bit.ly/3XV3CXY

Address

Cannock
WS124TR

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+441543573200

Website

Alerts

Be the first to know and let us send you an email when Chase Alloys Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share